Kobelco 7120S - Teambuild
This sharp Kobelco 7120S belongs to Teambuild from Singapore (SG) and was on a large construction site used to built a carpark.
It is a 120-tonne crawler crane. The crane is powered by a Hino P11C-VH, a 10.52-litre 6-cylinder diesel engine with a power of 271 kW (363 hp). The diesel engine powers in total four hydraulic pumps. The crane's undercarriage is 7.895 meters long and 6.31 meters wide.
A single track is 7.895 meters long, 0.91 meters wide and 1.231 meters tall. For the transport over the road is it required to separate the tracks from the body.
The crane is fitted with two 12-tonne hoist winches, each fitted with 26 mm hoist wire rope.
Attached to the superstructure is a nine-part counterweight with a total mass of 53.11 tonnes. The counterweight has a 4.95 meter tailswing.
This crane was fitted in tower configuration, the jib has a minimum length of 22.9 meters and has a maximum length of 44.2 meters. The jib has a 29 meter length here.
An overview of the full crane, the main boom is here 33.4 meters long, the jib 29 meters. The main boom is only positioned in an angle between 90 and 60 degrees. A very sharp crane of Teambuild!